XT500/TT500 - The right side stand

our extensive range of side stands for the XT and TT500

The variety of TT500 and XT500 models can be seen in the side stands.
The "early" models (TT500-'78 and XT500-'79) have a 10mm hole and the "later" models (TT500 '79- and XT500 '80-) have a 12mm hole for mounting the stand.

While the German models are equipped with a spring holder for 2 parallel springs, the "export models" only require one spring.

There are also differences in the "export models" in the various countries.
In the USA and in Austria, Belgium, France, Italy, the Netherlands and the United Kingdom, the upright does not require deflection, whereas in Switzerland, Denmark and Sweden it is equipped with spring deflection.

TT500 up to '78 and XT500 up to '79

We offer two side stands for the "early" XT500 models:

Heavy-duty replica XT500 side stand "German version"

TT500-'78, XT500-'79
For 10mm frame bore
For German frames with mount for two parallel side stand springs
HeavyDuty version made of high-strength material, very cleanly welded, with defined frame stop
black plastic-coated

Heavy-duty replica XT500 side stand "Export version"

TT500-'78, XT500/S-'79
For 10mm frame bore
For frames with mount for a side stand spring
HeavyDuty version made of high-strength material, very cleanly welded, with defined frame stop
black plastic-coated

Mounting material for the German XT500 models

TT500-'78, XT500-'79 (German version - with two parallel springs)
Mounting with the side stand Item no.: 10308

Bolt side stand

M10x1.25 35mm, for 10mm frame mount, long pin for two deflector plates, stainless steel, cross hole for locking pin,
OEM-Vergleichs-Nr. 1U4-27317-00

Side stand nut

M10x1.25 castle nut for split pin lock, stainless steel, OEM reference number 95307-08900

Matching cotter pin bright galvanized 2.0×16

Spring Side stand

1 piece (2x required, German side stand version), OEM no. 90507-25023 (90507-26025)

Side stand deflector plate

1 piece, stainless steel, with two spring suspension points, 2x required, OEM comparison no. 1U6-27315-00

Mounting material for the XT500 export models without spring deflection

TT500-'78, XT500-'79 (export models: A, B, F, I, NL, UK, US)
Mounting with the side stand Item no.: 10307

Bolt side stand export

M10x1.25 35mm, chrome-plated, cross hole for locking pin, suitable for 10mm frame hole

Side stand nut

M10x1.25 castellated nut, extra thin-walled, suitable for split pin lock

Matching cotter pin bright galvanized 2.0×16

Side stand spring XT500 Export

Dimensions unloaded:
146mm outside, 140mm inside, 3mm wire thickness

Mounting material for the XT500 export models with spring deflection

TT500-'78, XT500-'79 (export models: CH, DK, S)
Mounting with the side stand Item no.: 10307

Bolt side stand export with deflection

M10x1.25 35mm, stainless steel, short pin for a deflection plate, cross hole for locking pin, suitable for 10mm frame hole

Side stand nut

M10x1.25 castle nut for split pin lock, OEM no. 90171-10012

Matching cotter pin bright galvanized 2.0×16

Use the spring and deflector plate from the original, or use our conversion kit to double spring:

Conversion kit to double spring

suitable for models with original one side stand spring - the two parallel springs do not fit there

Complete side stand sets for the early XT and TT500 models

TT500-'78, XT500-'79

Complete side stand set

Older XT500 and import models usually only have one spring on the side stand, but the German TÜV requires two springs
Complete set for converting the XT500 up to model year 1979 to an approval-compliant double spring
Supplied including side stand as a ready-to-fit complete set including deflector plate, bolts and small parts

Side stand conversion set

The rescue in case of a knocked out mount on the frame!
Conversion using 12 mm bolt - the lug on the frame usually provides enough "meat" for the larger bolt
TÜV-compliant complete set including side stand, drill, deflector plates, springs, bolts and lock nuts

HSS drill bit 12mm - for conversion to 12mm stand holder

For drilling out worn side stand mounts
For conversion to the uprights of the later XTs with 12mm bolts
with reduced shank (suitable for cordless screwdrivers
Point angle 118°
roll-rolled

TT500 from '79 and XT500/S from '80

For the "later" models, we offer two basic side stand shapes and two length variants:

Heavy-duty replica XT500 side stand "German version"

TT500'79-, XT500/S'80-
For German frames with mount for two parallel side stand springs
For 12mm frame bore
Cleanly manufactured, elaborate replica, black coated
HeavyDuty version made of high-strength material, very cleanly welded, with defined frame stop
black plastic-coated
Take over small parts from the old part if necessary

Heavy-duty replica XT500 side stand "Export version"

TT500'79-, XT500/S'80-
For frames with mount for a side stand spring
For 12mm frame bore
Cleanly manufactured, elaborate replica, black coated
HeavyDuty version made of high-strength material, very cleanly welded, with defined frame stop
black plastic-coated
Take over small parts from the old part if necessary

Heavy-duty replica side stand "German version", + 21mm

TT500'79-, XT500/S'80-
moderately extended approx. + 21mm
for XTs with 370mm suspension (standard) that are too inclined
For German frames with mount for two parallel side stand springs
For 12mm frame bore
Cleanly manufactured, elaborate replica, black coated
HeavyDuty version made of high-strength material, very cleanly welded, with defined frame stop
black plastic-coated
Take over small parts from the old part if necessary

Heavy-duty replica side stand "German version", + 42mm

TT500'79-, XT500/S'80-
extended approx. + 42mm
for conversions to 390mm suspension struts and fork extensions or fork conversions
For German frames with mount for two parallel side stand springs
For 12mm frame bore
Cleanly manufactured, elaborate replica, black coated
HeavyDuty version made of high-strength material, very cleanly welded, with defined frame stop
black plastic-coated
Take over small parts from the old part if necessary